Product ID:SHELL TURBO(R) OIL 78, 65606
MSDS Date:09/19/1985
FSC:9150
NIIN:00-942-9343
MSDS Number: BJZXF

SHELL OIL COMPANY

HOUSTON, TX 77210
US

Emergency Phone: 713-473-9461;800-424-9300(CHEMTREC)

Info Phone: 713-241-4819

Preparer: JOHN P. SEPESI

Cage: 54527

SHELL OIL COMPANY

2463 HOUSTON, TX 77210 US

Telephone: 800-231-6950

Cage: 54527

MINERAL OIL, PETROLEUM DISTILLATES, HYDROTREATED HEAVY

CAS: 64742-54-7

RTECS: PY8035500

Fraction By Weight: 99%

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5 MG/M3;10 MG/M3STEL

MINOR ADDITIVES

Fraction By Weight: <1%

DO NOT INDUCE VOMIT. IN

RTECS: 9999999ZZ

IN

RTECS: 9999999ZZ

VISCOSITY, LOW VOLATILITY PRODS, I.E., MOST OILS &

RTECS: 9999999ZZ

VESSELS. SOAK UP RESIDUE W/ABSORBENT SUCH AS CLAY,

RTECS: 9999999ZZ

FLUSH AREA W/WATER TO REMOVE TRACE RESIDUE. SM

RTECS: 9999999ZZ

THIS PROD IS CLASSIFIED AS AN OIL UNDER SECTION 311

RTECS: 9999999ZZ

WATERS OR (B) ANY WATERCOURSES OR SEWERS

RTECS: 9999999ZZ

RPTD TO NATIONAL RESPONSE CTR, 800-424-8802. SUPP

RTECS: 9999999ZZ

INHAL OF VAPS (GENERATED AT HIGH

RTECS: 9999999ZZ

LUBRICATING OILS ARE

RTECS: 9999999ZZ

IF SWALLOWED.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Health Hazards Acute and Chronic:EYE: LUBRICATING OILS ARE GENERALLY
CONSIDERED TO BE NO MORE THAN MINIMALLY IRRIT TO EYES. SKIN:
LUBRICATING OILS ARE GENERALLY CONSIDERED TO BE NO MORE THAN
SLIGHTLY IRRIT TO SKIN. PRLNG & RPTD CONT MAY RESULT IN SKIN
DISORDERS SUCH AS DERMAT, OIL ACNE OR FOLLICULITIS. ACCIDENTAL
RELEASE UNDER HIGH PRESS (SUPP DATA)
Explanation of Carcinogenicity:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:IRRITATION AS NOTED ABOVE. NECROSIS MAY BE
EVIDENCED BY DELAYED ONSET OF PAIN AND TISSUE DAMAGE A FEW HOURS
FOLLOWING HIGH PRESSURE INJECTION.
Medical Cond Aggravated by Exposure:PREEXISTING SKIN AND RESPIRATORY
DISORDERS MAY BE AGGRAVATED BY EXPOSURE TO THIS PRODUCT.

First Aid:EYE: FLUSH W/WATER FOR AT LEAST 15 MIN WHILE HOLDING LIDS
OPEN. GET MD. SKIN: REMOVE CONTAM CLTHG & WIPE EXCESS OFF. WASH
W/SOAP & WATER OR A WATERLESS HAND CLEANER FOLLOWED BY SOAP &
WATER. IF IRRIT OCCURS, GET MD. IF MATL IS INJECTED UNDER SKIN,
GET MD IMMED TO PVNT SERIOUS DMG; DO NOT WAIT FOR SYMPTOMS TO
DEVELOP. INHAL: REMOVE VICTIM TO FRESH AIR & PROVIDE OXYGEN IF
BRTHG IS DFCLT. (SEE ING 3)

Flash Point Method:PMCC
Flash Point:415F,213C
Extinguishing Media:H2O FOG, FOAM, DRY CHEM OR CO2. DO NOT USE DIRECT
STREAM OF H2O. PROD WILL FLOAT & CAN BE REIGNITED ON SURF OF WATER.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
MATLS WILL NOT BURN UNLESS PREHEATED. DO NOT ENTER CONFINED FIRE
SPACE W/O FULL BUNKER GEAR (SEE SUPP DATA)
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:MAY BURN ALTHOUGH NOT READILY IGNIT. USE
CAUTIOUS JUDGEMENT WHEN CLEANING UP LRG SPILLS. LRG SPILLS: WEAR
NIOSH/MSHA APPRVD RESP & PROT CLTHG AS APPROP. SHUT OFF SOURCES OF
LEAK IF SAFE TO DO SO. DIKE & CONTAIN. REMOVE W/VACUUM TRUCKS OR
(SEE ING 5)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN A COOL, DRY PLACE WITH
ADEQUATE VENTILATION. KEEP AWAY FROM OPEN FLAMES AND HIGH
TEMPERATURES.
Other Precautions:MINIMIZE SKIN CONTACT. LAUNDER CONTAMINATED CLOTHING
BEFORE REUSE. PROPERLY DISPOSE OF CONTAM LEATHER ARTICLES,
INCLUDING SHOES, THAT CANNOT BE DECONTAMINATED.

Respiratory Protection:IF EXPOS MAY/DOES EXCEED OCCUPATIONAL EXPOS LIMS
USE A NIOSH/MSHA APPRVD RESP TO PVNT OVEREXP. IN ACCORD W/29 CFR
1910.134 USE EITHER AN NIOSH/MSHA APPRVD ATMOSPHERE-SUPPLYING RESP
OR AN AIR PURIFYING RESP FOR ORG VAPS & PARTICULATES.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:NITRILE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:PROTECTIVE CLOTHING.
Work Hygienic Practices:WASH WITH SOAP AND WATER BEFORE EATING,
DRINKING, SMOKING OR USING TOILET FACILITIES.
Supplemental Safety and Health
FIRE FIGHT PROC: (HELMET W/FACESHIELD, BUNKER COATS, GLOVES & RUBBER
BOOTS). COOL FIRE EXPOSED CNTNRS W/WATER. HAZ DECOMP PRODS:
PARTICULATES & GASES WILL EVOLVE WHEN THIS MATL UNDERGOES PYROLYSIS
OR COMBUST. CO & OTHER UNIDENTIFIED ORG CMPDS MAY BE FORMED UPON
COMBUST. HLTH HAZ: APPLICATNS MAY RESULT (SEE ING 10)

HCC:V6
Melt/Freeze Pt:M.P/F.P Text:10F,-12C
Spec Gravity:0.8805
Evaporation Rate & Reference:NOT AVAILABLE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:PALE YELLOW OIL. SLIGHT HYDROCARBON ODOR.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:AVOID HEAT, OPEN FLAMES, AND OXIDIZING
MATERIALS.
Hazardous Decomposition Products:THERM DECOMP PRODS ARE HIGHLY
DEPENDENT ON COMBUST CNDTNS. A COMPLEX MIXTURE OF AIRBORNE SOLID,
LIQUID, (SEE SUPP DATA)

Waste Disposal Methods:PLACE IN AN APPROPRIATE DISPOSAL FACILITY IN
COMPLIANCE WITH LOCAL REGULATIONS. DISPOSE IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.